Keep handles dry and clean .
15.
Disconnet tools:
When not in use, before serving and when changing accessories such as blades, bits
and cutters, disconnect tools from the power supply.
16. Remove adjusting
keys
and
wrenches:
From the habit of checking to see that keys and adjusting wrenches are removed from
the tool before turning in on.
17. Avoid unintentional starting:
Ensure switch is in "off' position when plugging in power supply.
18. Use outdoor extension
leads:
When the tool is used outdoors, only extension extension cords intended for outdoor
use and so marked.
19. Stay alert:
Watch what you are
doing,
use common sense and do not operate the tool when you
are
tired.
20.
Check
damaged parts:
Before furthur use of
tool,
it should be carefullv checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts. Breakage of parts.
Mounting and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced by an
authorized service center unless otherwise indicated in thie instruction manual.
Center defecive switches replaced by an authorized service center.
Do not use the tool if the switch does not turn it on and off.
21. Have your
tool
repaired by a qualified
person:
This electric tool complies with the relevant safety rules and regulations in Australia
and New Zealand.
Repairs should only be carried out by qualified persons, using original spare parts,
othewise this may result in considerable danger to the user.
22. Warning:
The use of any accessoty or attachment other than one recommended in this
instruction manual may present a risk of personal injury.
TECHNICAL
DATA
AC motor
Pi 2.0kwS6 40%
Isolation class
B
Table size
800x550mm
Table height
850mm
Cutting depth
82mm
Mnotor speed
2950rpm
Voltage
230V-50Hz
Saw blade
<t>315x*30x3mm
3
Assembly
fig. 1
fig. 2
fig. 3
Put the main part 1 on the proper table for
tools . Use 3 pes M6X16 six-head screw, 1
pes M6X20 six-head screw , 4 pes flat
washer 6 , 4 pes M6 Nut to assemble the
part 2 on the main part
1
.(the screw can't be
tightened too firmly , M6X20 six-head screw
in the position A)
Use 2 pes pan head screw M4X60, 2 pes pc
washer, 2 pes M4 Nut to mount the switch
(6 ) on the part 2 .
Use 3 pes M6X16
>
1 pes M6X20 six-head
screw
>
4 pes M6 flat washer, 4 pes M6 Nut
to assembly the part 3 on the main part 1.
The screw can't be tightened too
firmly .(M6X20 six-head screw in the position
B)
Use 4 pes M6X16 six-head screw , 4 pes M6
flat washer
>
4 pes M6 Nut to assemble the
part 4 on the main part 1. The screw can't be
tightened too firmly.
fig. 4
(16 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce