Charnwood W650 Provozní pokyny stáhnout pdf (Strana 8)

Loosen the four M6 bolts using a 10mm spanner (fig10) then slide aluminium extrusion

into place (fig 11 and 12) then re-tighten the M6 bolts.

Remove one end stop from the aluminium extrusion using a 6mm hex key (fig 13) and

slide sliding table into place (fig 14) replace end stop and re-tighten.

Fix the aluminium extrusion with attached metric scale to the front of the machine using

the cross head screws provided. Use a straight edge to ensure zero on the scale is in

line with the right hand side of the saw blade (fig 15)

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

Fig.16

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Charnwood W650 Provozní pokyny Strana 8